Smart Torque-Application Equipment Series

Product Introduction

　　Tightening process requirements (classified and adapted according to the specific application scenario)

Product Type	Screw specifications	Torque range	Tightening direction	Craftsmanship Features	Key Requirements
Engine block	M8-M14	20-120 Nm	Top-down	High-strength bolts, tightened in sequence.	Yield point method, angle monitoring, multi-axis synchronization
Transmission housing	M6-M12	10-80 Nm	Top-down	Aluminum alloy housing, sealing requirements	Torque + Angle, Sequential Tightening
Motor / Electric Control	M4-M8	3-25 Nm	Top-down	Copper busbar connections, electrical conductivity requirements	Torque accuracy ±3%, data traceability
Braking system	M6-M10	15-60 Nm	Multiple directions	Safety components, 100% traceable	CPK ≥ 1.33, curve storage
Suspension components	M10-M16	40-200 Nm	Top-down	High torque, anti-loosening requirements	Yield point method, torque + angle
Interior parts	M4-M6	2-8 Nm	Multiple directions	Plastic / Soft Materials	Low torque, scratch-resistant, and anti‑float nail technology
Headlight assembly	M3-M5	1-5 Nm	Top-down	Sealing and Waterproofing Requirements	Tighten in sequence and apply uniform pre-tension.
Seat assembly	M6-M10	8–40 Nm	Horizontal / Inverted	Multiple positions, large stroke	Long-stroke Z-axis, vacuum feeding

　　Equipment Basic Information

Project	Specifications and Parameters	Note
Device Name	Dual-axis quick-change automatic tightening machine	-
Device model	MK1-A005	-
Device Type	Online cabinet-type unit	With upper and lower conveyor lines
Overall machine weight	Approximately 850 kg	-
Power Requirements	AC 380 V ±10%, 50 Hz, three-phase five-wire system	Power approximately 4.5 kW
Air Source Requirements	0.5–0.6 MPa, flow rate ≥ 350 L/min	Dry compressed air
Relative humidity	20% ~ 90% (no condensation)	-
Ambient temperature	0℃ ~ 40℃	-
Overall external dimensions	Width 1300 × Depth 1600 × Height 2100 mm	Gold-plated casing
Internal dimensions of the machine	Width 1200 × Depth 1500 × Height 2000 mm	Effective workspace

　　 Core Performance Parameters

Project	Specifications and Parameters	Note
Locking efficiency	≤45 seconds / piece	Includes interchangeable bits, far exceeding the 130-second requirement.
Number of tightened shafts	2-axis	Arranged in bilateral symmetry
Positioning accuracy	±0.02 mm	Three-axis module assurance
Repeatability	±0.02 mm	-
Torque range	M4: 1.0–2.5 Nm / M6: 5.0–10 Nm	Programmable setting
Torque accuracy	±3%	Servo electric screwdriver
Applicable screws	M4, M6 hex socket	Length ≤ 20 mm
Quick-change time	≤8 seconds / time	Includes mobile service + replacement + identification
Z-axis travel	150 mm	Meet the needs
Maximum load	15 kg (Z-axis)	-
Maximum speed	500 mm/s	X/Y/Z axis

　　Core Performance Parameters

Keywords： Smart Torque-Application Equipment Series

Previous item： ——